To clean the product, use a slightly damped piece of soft cloth. DO NOT use harsh chemicals, cleaning solvents, bleaches or strong detergents.

When the air is trapped within the radiator, it may cause inefficient heating. Follow the instructions below in order to release the trapped air from the radiator:

Turn the plastic on top of the air vent by hand to the direction where you want to release the air.
Small amount of water will drain so it is best practice to keep a small container underneath the hole.
Unscrew the air vent with a screw driver or a radiator key until the air releases. Once all the trapped air is released , water will start draining, immediately screw the air vent.

Removing the water content from the radiator may cause corrosion.

DO NOT remove the water from the radiator during repairs or when the product is not in use. (Summer seasons etc.)' In order to keep the water within the radiator, close both valves.

DO NOT use in open air environments and where the air temperature is below 0 00. If the water within the radiator freezes it may cause problems.

Although the product is tested for 13 bar pressure, maximum recommended working pressure is 10 bar 120 C DO NOT use the product above these limits.